Summer Is Around The Corner - Treat Yourself with some Cool Audio cables - Great Prices

CloseClose
CloseClose
Close

Grado Prestige Red 2 Moving Magnet Cartridge

    ThumbnailThumbnail
    Sale -19%
    Description

    Description

    The Red2 uses a four piece OTL cantilever that has a Grado specific diamond mounted on a brass bushing.
     
    Grado’s OTL, or optimised transmission line, technology provides an ideal transfer of signal from the surface of the LP to the generator of the system. This technology rejects unwanted resonances and lowers distortion preserving the fundamental and harmonic frequencies of the music. This also helps keep noise generated by the motor system in the cartridge to a minimum.

    Grado’s OTL stylus/cantilever design makes records sound quieter, improves the height, width, and depth of the soundstage, and present more detail than previously obtainable.

    The Red2 is hand assembled by Grado's team in Brooklyn, with some builders having over 25 years of experience. This updated series of cartridges offers excellent tonal balance, dynamics, and realism, for a most rewarding reproduction of vocals and instruments. The coil winding techniques using ultra high purity copper wire, which were honed during the development of the Lineage Series, have let the electrical circuits achieve unison between the four coils in each phono cartridge. This allows for a precise balance between channels and accurate stereo imaging.
     
    As in all Grado phono cartridges the Red2 is powered by a twin magnet system that optimizes the balance between stereo channels. All internal magnetic circuit parts are held to extremely high tolerances creating the desired stereo imaging. Grado’s patented Flux-Bridger design allows the Red2 to have one of the lowest effective moving mass generating systems while creating an excellent balance throughout the full frequency range.

    Features

    Image

    Hand-Built in Brooklyn
    Image
    Diamond Tipped
    Image
    Twin Magnet System
    Image
    Patented Flux-Bridge™
    Image

    Ultra High Purity Copper Coil
    Image

    Four Coil Unison
    Image

    De-Stressed Chasis
    Image

    Swiss Screw Machined

    Specifications

    Frequency Response: 
    		 10-55
    Principal: MI
    Channel Separation at 1KHz:  30
    Input Load:  47K
    Output at 1KHz 5CM/sec.:  5mV
    Recommended Tracking Force:  1.5
    Stylus Type:  E
    Inductance:  45mH
    Resistance: 475
    Compliance CUs:  20
    User replaceable stylus
    Mounting:  S/P
    Weight:  5.5

    Login To view your available points.

    Grado Prestige Red 2 Moving Magnet Cartridge

      Product form

      £159.00£129.00 Incl. VAT

         More payment options
          Description

          Description

          The Red2 uses a four piece OTL cantilever that has a Grado specific diamond mounted on a brass bushing.
           
          Grado’s OTL, or optimised transmission line, technology provides an ideal transfer of signal from the surface of the LP to the generator of the system. This technology rejects unwanted resonances and lowers distortion preserving the fundamental and harmonic frequencies of the music. This also helps keep noise generated by the motor system in the cartridge to a minimum.

          Grado’s OTL stylus/cantilever design makes records sound quieter, improves the height, width, and depth of the soundstage, and present more detail than previously obtainable.

          The Red2 is hand assembled by Grado's team in Brooklyn, with some builders having over 25 years of experience. This updated series of cartridges offers excellent tonal balance, dynamics, and realism, for a most rewarding reproduction of vocals and instruments. The coil winding techniques using ultra high purity copper wire, which were honed during the development of the Lineage Series, have let the electrical circuits achieve unison between the four coils in each phono cartridge. This allows for a precise balance between channels and accurate stereo imaging.
           
          As in all Grado phono cartridges the Red2 is powered by a twin magnet system that optimizes the balance between stereo channels. All internal magnetic circuit parts are held to extremely high tolerances creating the desired stereo imaging. Grado’s patented Flux-Bridger design allows the Red2 to have one of the lowest effective moving mass generating systems while creating an excellent balance throughout the full frequency range.

          Features

          Image

          Hand-Built in Brooklyn
          Image
          Diamond Tipped
          Image
          Twin Magnet System
          Image
          Patented Flux-Bridge™
          Image

          Ultra High Purity Copper Coil
          Image

          Four Coil Unison
          Image

          De-Stressed Chasis
          Image

          Swiss Screw Machined

          Specifications

          Frequency Response: 
          		 10-55
          Principal: MI
          Channel Separation at 1KHz:  30
          Input Load:  47K
          Output at 1KHz 5CM/sec.:  5mV
          Recommended Tracking Force:  1.5
          Stylus Type:  E
          Inductance:  45mH
          Resistance: 475
          Compliance CUs:  20
          User replaceable stylus
          Mounting:  S/P
          Weight:  5.5

          The Joe Audio Promise

          As a specialist supplier of some of the greatest equipment to our customers, we set ourselves high standards that match our amazing products and always strive to offer..

          • The latest and greatest equipment available at all times
          • FREE shipping anywhere within the UK
          • Specialist advice available from our customer service team

          Recently viewed products

          Family owned with over 30000 customers and couniting!

          Rated Excellent on Trust Pilot

          Spread the cost with KLARNA

          Family owned with over 30000 customers and couniting!

          Rated Excellent on Trust Pilot

          Spread the cost with KLARNA

          Close
          Rewards