Summer Is Around The Corner - Treat Yourself with some Cool Audio cables - Great Prices

CloseClose
CloseClose
Close

Audioquest Irish Red Subwoofer Cable

    ThumbnailThumbnail
    Last stock!
    Description

    Description

    SOLID .5% SILVER CONDUCTORS FOR IMPROVED SUBWOOFER PERFORMANCE
    Solid .5% Silver-Plated Copper Conductors: A superbly cost-effective way to maximize a video or digital cable, harsh and horrible for full-range audio, but like turning up the “sharpness” for a subwoofer, enhancing articulation and intelligibility.

     

    METAL-LAYER NOISE-DISSIPATION

    It's easy to accomplish 100% shield coverage. Preventing captured radio-frequency interference (RFI) from modulating the equipment's ground reference requires AQ's Noise-Dissipation. Traditional shield systems typically absorb and then drain noise/RF energy to component ground, modulating and distorting the critical "reference" ground plane, which in turn causes a distortion of the signal. Noise-Dissipation "shields the shield," absorbing and reflecting most of this noise/RF energy before it reaches the layer attached to ground.

    SYMMETRICAL COAX GEOMETRY

    Identical positive (+) and negative (-) conductors prevent the shield from being used as an inferior audio conductor.

     

    COLD-WELDED, GOLD-PLATED TERMINATIONS

    This plug design allows for a connection devoid of solder, which is a common source of distortion. Instead of solder, the process employs a high-pressure technique. Because the ground shells are stamped instead of machined, the metal used can be chosen for low distortion instead of machinability.

    FOAMED-POLYETHYLENE INSULATION

    Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy. Some of this energy is stored and then released as distortion. Because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile, Foamed-PE, with its high air content, causes much less of the out-of-focus effect common to other materials.

    Specifications

     Metal 0.5% Silver
    Conductor Solid Conductors
    Geometry Symmetrical Coax
    Dielectric Foamed-Polyethylene
    Noise-Dissipation Metal-Layer Noise-Dissipation
    Jacket  Up to 5m: Red/Black Braid 8m and Longer Black PVC with Red Stripes
    Termination Cold-Welded, Gold-Plated
    Login To view your available points.

    Audioquest Irish Red Subwoofer Cable

      Product form

      £89.00 Incl. VAT

      1 in stock Delivered less than 36 hours

      • Dispatch today? Order within:
        00day
        00hour
        51minutes
        41seconds

       More payment options
        Description

        Description

        SOLID .5% SILVER CONDUCTORS FOR IMPROVED SUBWOOFER PERFORMANCE
        Solid .5% Silver-Plated Copper Conductors: A superbly cost-effective way to maximize a video or digital cable, harsh and horrible for full-range audio, but like turning up the “sharpness” for a subwoofer, enhancing articulation and intelligibility.

         

        METAL-LAYER NOISE-DISSIPATION

        It's easy to accomplish 100% shield coverage. Preventing captured radio-frequency interference (RFI) from modulating the equipment's ground reference requires AQ's Noise-Dissipation. Traditional shield systems typically absorb and then drain noise/RF energy to component ground, modulating and distorting the critical "reference" ground plane, which in turn causes a distortion of the signal. Noise-Dissipation "shields the shield," absorbing and reflecting most of this noise/RF energy before it reaches the layer attached to ground.

        SYMMETRICAL COAX GEOMETRY

        Identical positive (+) and negative (-) conductors prevent the shield from being used as an inferior audio conductor.

         

        COLD-WELDED, GOLD-PLATED TERMINATIONS

        This plug design allows for a connection devoid of solder, which is a common source of distortion. Instead of solder, the process employs a high-pressure technique. Because the ground shells are stamped instead of machined, the metal used can be chosen for low distortion instead of machinability.

        FOAMED-POLYETHYLENE INSULATION

        Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy. Some of this energy is stored and then released as distortion. Because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile, Foamed-PE, with its high air content, causes much less of the out-of-focus effect common to other materials.

        Specifications

         Metal 0.5% Silver
        Conductor Solid Conductors
        Geometry Symmetrical Coax
        Dielectric Foamed-Polyethylene
        Noise-Dissipation Metal-Layer Noise-Dissipation
        Jacket  Up to 5m: Red/Black Braid 8m and Longer Black PVC with Red Stripes
        Termination Cold-Welded, Gold-Plated

        The Joe Audio Promise

        As a specialist supplier of some of the greatest equipment to our customers, we set ourselves high standards that match our amazing products and always strive to offer..

        • The latest and greatest equipment available at all times
        • FREE shipping anywhere within the UK
        • Specialist advice available from our customer service team

        Recently viewed products

        Family owned with over 30000 customers and couniting!

        Rated Excellent on Trust Pilot

        Spread the cost with KLARNA

        Family owned with over 30000 customers and couniting!

        Rated Excellent on Trust Pilot

        Spread the cost with KLARNA

        Close
        Rewards