Advantages of High-Quality Audio Cables - Joe Audio
, by Haim Deutsch, 4 min reading time
, by Haim Deutsch, 4 min reading time
The amplifier is connected to the speakers by speaker cables.
In the industry, there has been much discussion about whether a speaker's quality affects how well it sounds.
Traditionally, speaker cables had standard copper wiring, but now other options exist.
Most of the time, speaker cables go overlooked when purchasing a new stereo or speaker system.
This is because customers spend almost all of their budget on a new audio system and consequently settle for cheap speaker cables.
The speaker system cannot perform to its full potential when using poor speaker cables.
High-quality speaker cables are unquestionably a wise investment because they offer several technical advantages that inferior cables do not.
Increased reliability is provided by using premium speaker cables. Superior to inferior speaker cables, high-quality speaker cables are more durable and able to withstand the stresses of transport.
Additionally, they are less likely to corrode. Sheath quality is typically higher on speaker cables.
The cable's outer covering is known as the sheath. A sheath that is thicker and of higher quality will last longer and be less likely to split or sustain damage.
Higher quality models can tolerate being occasionally stood on without affecting the quality of the cable for cables that must trail across the floor.
Using High-Quality Speaker Cables to Reduce Inductance
High-quality speaker cables have lower inductance, which boosts the cable's effectiveness.
This is accomplished by grouping conductors and creating numerous twisted pairs out of them.
The conductors are arranged so that they face each other, creating a magnetized field that lowers the inductance within the cable.
High-Quality Speaker Cables Can Reduce the Skin Effect
The term "skin effect" describes how high-frequency sound signals do not travel through conductors uniformly and evenly, but rather glide over their topmost surface, or skin.
The audio becomes significantly less clear as a result and has an unpleasant blended effect.
The internal wires of high-quality speaker cables are arranged in a close-fitting formation to force the signals to pass uniformly through the conductors, reducing high-frequency signal skimming.
In high-quality speaker cables, shielding is layered multiple times
Shielding on premium cables is dense and multi-layered. Shielding is the term for the layers that encircle the wire cores to stop signal loss and lessen interference.
The internal wires of the best cables are shielded beneath the sheath by one or more layers.
These cables stop the phenomenon known as crosstalk, which can lower performance quality, from occurring when opposing wires cross.
Incompatible wires should never touch to ensure that performance is always maximized.
Shielding is constructed using multiple layers to minimize signal loss during data transmission and to shield the system from outside noise and interference.
The Speaker Cable's Core's Quality
Copper is the material most frequently used for speaker cable cores.
High-quality cores improve conductivity and aid in maintaining the integrity of data packets as they move along the cable.
Depending on the cable configuration, shielding, sheathing, and construction, cables with a standard copper core may still be regarded as high quality.
Other metals used in high-quality speaker cables include pure copper with no impurities and oxygen-reduced copper. High-quality speaker cables with silver and gold cores are likewise offered.
View Product: Atlas Element HDMI 4K Cable
Many times, customers buy high-quality speaker cables but forget to buy high-quality connectors.
High-quality cables and expensive hi-fi and speaker systems are of little use without good connectors because they will not allow a buyer to benefit from the other components of their setup.
A tight fit is a sign of a high-quality connector because it ensures a reliable connection.
By doing this, the audio quality loss that occurs as the signal travels from the cable, through the connector, and into the speaker is reduced.
Pure copper, silver, or gold are used to create the finest connectors.
Length of speaker cables for premium speakers
The speaker run refers to the length of cable needed to connect the amplifier or stereo to each speaker.
Standard speaker cables generally require the speakers to be as close to the input device as possible to receive adequate audio.
Customers can extend their cable run without sacrificing audio quality by using a premium speaker cables.
Customers can create an immersive surround sound setup thanks to the stereo system's increased versatility without sacrificing clarity or quality.
Speakers connected to high-quality cables produce noticeably better audio. High-quality cables significantly reduce quality loss and better preserve the data packets as they move along the wires.
This ensures that a large portion of the data sent from the input device reaches the output device intact, without any data being altered. This results in very accurate audio replication with a pleasant sound.
Choose from our huge selection of speaker cables and purchase them from Joe Audio right away.