
- New phono cartirdge replacing the admired Blue Point No. 2
- Sound refinement of an MC with the output voltage of a typical MM design
- Low-resonance body that's easy to install to any common tonearm
Oyster Series
Recently, Sumiko made the decision to explore the resonance optimisation of the Blue Point No. 2 as they recognised there was room for refinement for this well-established cartridge. Resonance has a more significant impact than many listeners realise and Sumiko wanted to re-imagine how the housing resonates around the generator in the Blue Point range. This resulted in the arrival of the new Blue Point No. 3.
With the tried and true moving cartridge generator system, the smoothness is enhanced with the subtlety and nuance you’d expect from a Sumiko moving cartridge. Blue Point No. 3 assembles its sonic picture from the ground up with its low-end response. Full and warm yet defined and textured, the cosiness of the bass will invite you right in. In addition to this, you can expect a similar richness through the mids that remain decipherable, high-frequency attack and decay that’s simply sweet and airy.
Having developed such a refinement on a classic design, introducing both a high and low output variant was a no-brainer. As strongly as we admire the Blue Point No. 3 High, the Blue Point No. 3 Low is a game changer. Owners of moving cartridge phono stages can experience the same audio experience mentioned, but with the depth and imaging typical of a low-output design. Similar to its predecessors, Blue Point No. 3 remains a high-value performer that is affordable and with the introduction of Blue Point No. 3 Low, there’s a Blue Point for everyone.
Features
- High Output Moving Coil cartridge with 0.3 x 0.7 micron Elliptical stylus
- Sound refinement of an MC with the output voltage of a typical MM design
- Low-resonance body that's easy to install to any common tonearm
- Overhead mounting design
- High output for easy matching to a phono stage
- Easy to set-up and install
Specifications
Blue Point No. 3 Low
Frequency Response: | 13Hz - 35kHz |
Output Voltage: | 0.5mV @ 1kHz |
Internal Impedance: | 28 Ω |
Load Impedance: | >100Ω |
Stylus Type: | 0.3 x 0.7mil |
Channel Seperation: | 30dB @ 1kHz |
Channel Balance: | <1dB@ 1kHz |
Cartridge Type: | Moving Coil |
Cantilever: | Aluminium Pipe |
Compliance: | 12x10-6 cm/dyn @ 100 Hz |
Capacitance: | 100pF-200pF |
Vertical Tracking Angle: | 20º |
Tracking Force Range: | 1.8 - 2.2g |
Recommended Force: | 2.0g |
Cartridge Weight: | 6g |
Blue Point No. 3 High
Frequency Response: | 13Hz - 35kHz |
Output Voltage: | 2.5mV @ 1kHz |
Internal Impedance: | 135Ω |
Load Impedance: | 47kΩ |
Stylus Type: | 0.3 x 0.7mil Elliptical |
Channel Seperation: | 30dB @ 1kHz |
Channel Balance: | <1dB@ 1kHz |
Cartridge Type: | Moving Coil |
Cantilever: | Aluminium Pipe |
Compliance: | 12x10-6 cm/dyn @ 100 Hz |
Capacitance: | 100pF-200pF |
Vertical Tracking Angle: | 20º |
Tracking Force Range: | 1.8 - 2.2g |
Recommended Force: | 2.0g |
Cartridge Weight: | 6g |
Replacement Stylus Unit: | Contact us |
Free Delivery
Free 3-5 day delivery on all orders within the UK with no minimum spend
12 Month Guarantee
12 month guarantee on all products for your peace of mind
Best price promise
We beat or match any price on the whole range at Joe Audio