BRRRR IT'S COLD - Treat yourself with some HOT products

Nagaoka MP-300 Moving Magnet Cartridge

    Description

    The Nagaoka MP-300 is a high-end moving magnet phono cartridge, which delivers sophistication, refinement and high definition at all audible frequencies thus making it a favorite phonograph cartridge and a must have for the true vinyl lover and enthusiast.

    It is nimble on the grooves and easy on the ears so you keep on wanting to listen. The Nagaoka MP300 is an advanced technology cartridge that is destined to become a classic out of the box.

    Utilising an exclusive, super-rigid body, the MP-300 delivers ultra resonance and superb fidelity and fine detail recovery, aided by a superfine polished special elliptical bonded diamond stylus and a powerful samarium cobalt magnet. The hardened-low mass, high strength boron cantilever offers impeccable tracking.

    The time for the stylus replacement JN-P300 varies depending on how often and how it is used.  For general use at home the expected time is between 150-200 hours which by then the stylus will begin to wear and the tone quality starts to deteriorate. It is recommend to replace the stylus as early as possible so you can enjoy clear music  and cause no damage to the disc grooves.

    Features

    • Exclusive super rigid body for ultra resonance and superb fidelity
    • Superfine polished special elliptical bonded diamond stylus
    • Powerful samarium cobalt magnet
    • Hardened low-mass, high strength boron cantilever
    • Carbon fiber reinforced plastic shoe
    • Anti ferrous magnetic Permalloy shield casing

    Specifications

    Type Moving Permalloy
    Cantilever High-strength boron
    Stylus Type Superfine elliptical diamond 0.4 x 0.7mm
    Weight 8g
    Output voltage: 1kHz, 5cm/sec: 3mV
    Frequency response: 20Hz - 25kHz
    Channel balance 1kHz: >1dB
    Channel separation 1kHz: >25dB
    Recommended loading 47k ohms
    Dynamic compliance  7.2 x 10.6cm /dyne
    Static compliance 20 x 10.6cm /dyne
    Tracking force range 1.3 - 1.8g

    Nagaoka MP-300 Moving Magnet Cartridge

      Product form

      £639.00£629.00 Incl. VAT

      3 in stock Delivered less than 36 hours

          Description

          The Nagaoka MP-300 is a high-end moving magnet phono cartridge, which delivers sophistication, refinement and high definition at all audible frequencies thus making it a favorite phonograph cartridge and a must have for the true vinyl lover and enthusiast.

          It is nimble on the grooves and easy on the ears so you keep on wanting to listen. The Nagaoka MP300 is an advanced technology cartridge that is destined to become a classic out of the box.

          Utilising an exclusive, super-rigid body, the MP-300 delivers ultra resonance and superb fidelity and fine detail recovery, aided by a superfine polished special elliptical bonded diamond stylus and a powerful samarium cobalt magnet. The hardened-low mass, high strength boron cantilever offers impeccable tracking.

          The time for the stylus replacement JN-P300 varies depending on how often and how it is used.  For general use at home the expected time is between 150-200 hours which by then the stylus will begin to wear and the tone quality starts to deteriorate. It is recommend to replace the stylus as early as possible so you can enjoy clear music  and cause no damage to the disc grooves.

          Features

          • Exclusive super rigid body for ultra resonance and superb fidelity
          • Superfine polished special elliptical bonded diamond stylus
          • Powerful samarium cobalt magnet
          • Hardened low-mass, high strength boron cantilever
          • Carbon fiber reinforced plastic shoe
          • Anti ferrous magnetic Permalloy shield casing

          Specifications

          Type Moving Permalloy
          Cantilever High-strength boron
          Stylus Type Superfine elliptical diamond 0.4 x 0.7mm
          Weight 8g
          Output voltage: 1kHz, 5cm/sec: 3mV
          Frequency response: 20Hz - 25kHz
          Channel balance 1kHz: >1dB
          Channel separation 1kHz: >25dB
          Recommended loading 47k ohms
          Dynamic compliance  7.2 x 10.6cm /dyne
          Static compliance 20 x 10.6cm /dyne
          Tracking force range 1.3 - 1.8g

          The Joe Audio Promise

          As a specialist supplier of some of the greatest equipment to our customers, we set ourselves high standards that match our amazing products and always strive to offer..

          • The latest and greatest equipment available at all times
          • FREE shipping anywhere within the UK
          • Specialist advice available from our customer service team

          Recently viewed products

          Login

          Forgot your password?

          Don't have an account yet?
          Create account