BRRRR IT'S COLD - Treat yourself with some HOT products

Grado Prestige Green 3 Moving Magnet Cartridge

    Description

    The Green3 uses a three piece OTL cantilever that has a Grado specific diamond mounted on a brass bushing.

    What's the difference between Black3 and Green3?
    Approximately 15% of the Black3 production run meet higher specifications. These are hand selected from the batch and designated as Green3.

    Grado’s OTL, or optimised transmission line, technology provides an ideal transfer of signal from the surface of the LP to the generator of the system. This technology rejects unwanted resonances and lowers distortion preserving the fundamental and harmonic frequencies of the music. This also helps keep noise generated by the motor system in the cartridge to a minimum.

    Grado’s OTL stylus/cantilever design makes records sound quieter, improves the height, width, and depth of the soundstage, and present more detail than previously obtainable.

    The Green3 is hand assembled by Grado's team in Brooklyn, with some builders having over 25 years of experience. This updated series of cartridges offers excellent tonal balance, dynamics, and realism, for a most rewarding reproduction of vocals and instruments. The coil winding techniques using ultra high purity copper wire, which were honed during the development of the Lineage Series, have let the electrical circuits achieve unison between the four coils in each phono cartridge. This allows for a precise balance between channels and accurate stereo imaging.
      
    As in all Grado phono cartridges the Green3 is powered by a twin magnet system that optimizes the balance between stereo channels. All internal magnetic circuit parts are held to extremely high tolerances creating the desired stereo imaging. Grado’s patented Flux-Bridger design allows the Green3 to have one of the lowest effective moving mass generating systems while creating an excellent balance throughout the full frequency range.

    Features 

    Image

    Hand-Built in Brooklyn
    Image
    Diamond Tipped
    Image
    Twin Magnet System
    Image
    Patented Flux-Bridge™
    Image

    Ultra High Purity Copper Coil
    Image

    Four Coil Unison
    Image

    De-Stressed Chasis
    Image

    Swiss Screw Machined

    Specifications

    Frequency Response: 
    		 10-50
    Principal: MI
    Channel Separation at 1KHz:  30
    Input Load:  47K
    Output at 1KHz 5CM/sec.:  5mV
    Recommended Tracking Force:  1.5
    Stylus Type:  E
    Inductance:  45mH
    Resistance: 475
    Compliance CUs:  20
    User replaceable stylus
    Mounting:  S/P
    Weight:  5.5

    Grado Prestige Green 3 Moving Magnet Cartridge

      Product form

      £129.00 Incl. VAT

      • Dispatch today? Order within: Dec 26, 2024 14:00:00 +0000

        Description

        The Green3 uses a three piece OTL cantilever that has a Grado specific diamond mounted on a brass bushing.

        What's the difference between Black3 and Green3?
        Approximately 15% of the Black3 production run meet higher specifications. These are hand selected from the batch and designated as Green3.

        Grado’s OTL, or optimised transmission line, technology provides an ideal transfer of signal from the surface of the LP to the generator of the system. This technology rejects unwanted resonances and lowers distortion preserving the fundamental and harmonic frequencies of the music. This also helps keep noise generated by the motor system in the cartridge to a minimum.

        Grado’s OTL stylus/cantilever design makes records sound quieter, improves the height, width, and depth of the soundstage, and present more detail than previously obtainable.

        The Green3 is hand assembled by Grado's team in Brooklyn, with some builders having over 25 years of experience. This updated series of cartridges offers excellent tonal balance, dynamics, and realism, for a most rewarding reproduction of vocals and instruments. The coil winding techniques using ultra high purity copper wire, which were honed during the development of the Lineage Series, have let the electrical circuits achieve unison between the four coils in each phono cartridge. This allows for a precise balance between channels and accurate stereo imaging.
          
        As in all Grado phono cartridges the Green3 is powered by a twin magnet system that optimizes the balance between stereo channels. All internal magnetic circuit parts are held to extremely high tolerances creating the desired stereo imaging. Grado’s patented Flux-Bridger design allows the Green3 to have one of the lowest effective moving mass generating systems while creating an excellent balance throughout the full frequency range.

        Features 

        Image

        Hand-Built in Brooklyn
        Image
        Diamond Tipped
        Image
        Twin Magnet System
        Image
        Patented Flux-Bridge™
        Image

        Ultra High Purity Copper Coil
        Image

        Four Coil Unison
        Image

        De-Stressed Chasis
        Image

        Swiss Screw Machined

        Specifications

        Frequency Response: 
        		 10-50
        Principal: MI
        Channel Separation at 1KHz:  30
        Input Load:  47K
        Output at 1KHz 5CM/sec.:  5mV
        Recommended Tracking Force:  1.5
        Stylus Type:  E
        Inductance:  45mH
        Resistance: 475
        Compliance CUs:  20
        User replaceable stylus
        Mounting:  S/P
        Weight:  5.5

        The Joe Audio Promise

        As a specialist supplier of some of the greatest equipment to our customers, we set ourselves high standards that match our amazing products and always strive to offer..

        • The latest and greatest equipment available at all times
        • FREE shipping anywhere within the UK
        • Specialist advice available from our customer service team

        Recently viewed products

        Login

        Forgot your password?

        Don't have an account yet?
        Create account