Christmas Is Around The Corner - Don't Wait For the Rush - Buy Today

Audioquest Irish Red Subwoofer Cable

Description

SOLID .5% SILVER CONDUCTORS FOR IMPROVED SUBWOOFER PERFORMANCE
Solid .5% Silver-Plated Copper Conductors: A superbly cost-effective way to maximize a video or digital cable, harsh and horrible for full-range audio, but like turning up the “sharpness” for a subwoofer, enhancing articulation and intelligibility.

 

METAL-LAYER NOISE-DISSIPATION

It's easy to accomplish 100% shield coverage. Preventing captured radio-frequency interference (RFI) from modulating the equipment's ground reference requires AQ's Noise-Dissipation. Traditional shield systems typically absorb and then drain noise/RF energy to component ground, modulating and distorting the critical "reference" ground plane, which in turn causes a distortion of the signal. Noise-Dissipation "shields the shield," absorbing and reflecting most of this noise/RF energy before it reaches the layer attached to ground.

SYMMETRICAL COAX GEOMETRY

Identical positive (+) and negative (-) conductors prevent the shield from being used as an inferior audio conductor.

 

COLD-WELDED, GOLD-PLATED TERMINATIONS

This plug design allows for a connection devoid of solder, which is a common source of distortion. Instead of solder, the process employs a high-pressure technique. Because the ground shells are stamped instead of machined, the metal used can be chosen for low distortion instead of machinability.

FOAMED-POLYETHYLENE INSULATION

Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy. Some of this energy is stored and then released as distortion. Because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile, Foamed-PE, with its high air content, causes much less of the out-of-focus effect common to other materials.

Specifications

 Metal 0.5% Silver
Conductor Solid Conductors
Geometry Symmetrical Coax
Dielectric Foamed-Polyethylene
Noise-Dissipation Metal-Layer Noise-Dissipation
Jacket  Up to 5m: Red/Black Braid 8m and Longer Black PVC with Red Stripes
Termination Cold-Welded, Gold-Plated

Audioquest Irish Red Subwoofer Cable

Product form

£89.00 Incl. VAT

1 in stock Delivered less than 36 hours

      Description

      SOLID .5% SILVER CONDUCTORS FOR IMPROVED SUBWOOFER PERFORMANCE
      Solid .5% Silver-Plated Copper Conductors: A superbly cost-effective way to maximize a video or digital cable, harsh and horrible for full-range audio, but like turning up the “sharpness” for a subwoofer, enhancing articulation and intelligibility.

       

      METAL-LAYER NOISE-DISSIPATION

      It's easy to accomplish 100% shield coverage. Preventing captured radio-frequency interference (RFI) from modulating the equipment's ground reference requires AQ's Noise-Dissipation. Traditional shield systems typically absorb and then drain noise/RF energy to component ground, modulating and distorting the critical "reference" ground plane, which in turn causes a distortion of the signal. Noise-Dissipation "shields the shield," absorbing and reflecting most of this noise/RF energy before it reaches the layer attached to ground.

      SYMMETRICAL COAX GEOMETRY

      Identical positive (+) and negative (-) conductors prevent the shield from being used as an inferior audio conductor.

       

      COLD-WELDED, GOLD-PLATED TERMINATIONS

      This plug design allows for a connection devoid of solder, which is a common source of distortion. Instead of solder, the process employs a high-pressure technique. Because the ground shells are stamped instead of machined, the metal used can be chosen for low distortion instead of machinability.

      FOAMED-POLYETHYLENE INSULATION

      Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy. Some of this energy is stored and then released as distortion. Because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile, Foamed-PE, with its high air content, causes much less of the out-of-focus effect common to other materials.

      Specifications

       Metal 0.5% Silver
      Conductor Solid Conductors
      Geometry Symmetrical Coax
      Dielectric Foamed-Polyethylene
      Noise-Dissipation Metal-Layer Noise-Dissipation
      Jacket  Up to 5m: Red/Black Braid 8m and Longer Black PVC with Red Stripes
      Termination Cold-Welded, Gold-Plated

      The Joe Audio Promise

      As a specialist supplier of some of the greatest equipment to our customers, we set ourselves high standards that match our amazing products and always strive to offer..

      • The latest and greatest equipment available at all times
      • FREE shipping anywhere within the UK
      • Specialist advice available from our customer service team

      Recently viewed products

      Login

      Forgot your password?

      Don't have an account yet?
      Create account