SURPRISE Special Treat @ CHECKOUT Plus Reduced Next Day Shipping

Nagaoka JN-P200 Replacement Stylus for MP-200

    Description

    Nagaoka JNP-200 Replacement Stylus is the original replacement stylus for the MP-200 MM cartridge featuring an elliptical block diamond tip and boron cantilever.

    Replace a worn out or defective stylus to prevent damage to your records, and enjoy the best from your records again with more musical information being extracted from the vinyl grooves, allowing you to enjoy the best sound quality.

    The time for the stylus replacement varies depending on how often and how it is used.  For general use at home the expected time is between 150-200 hours which by then the stylus will begin to wear and the tone quality starts to deteriorate. It is recommend to replace the stylus as early as possible so you can enjoy clear music  and cause no damage to the disc grooves.

    Features

    • Superfine polished special elliptical diamond stylus
    • Powerful samarium cobalt magnet
    • Hardened low-mass, tapered aluminum alloy cantilever for very high fidelity
    • Carbon fiber reinforced plastic shoe
    • Anti ferrous magnetic perm-alloy shield casing

    Specifications

    Type:  Moving Permalloy
    Cantilever:  High-strength Boron
    Stylus Type:  Superfine elliptical diamond 0.4 x 0.7 mil
    Weight:  6.5g
    Output voltage: 1kHz, 5cm/sec: 4mV
    Frequency response: 20Hz - 23kHz
    Channel balance:  1kHz: >1.5dB
    Channel separation:  1kHz: >25dB
    Recommended loading:  47k ohms
    Dynamic compliance:  7.2 x 10-6 cm/dyne
    Static compliance:  20 x 10-6 cm/dyne
    Tracking force range:  1.5g - 2.0g

    Read more

    Nagaoka JN-P200 Replacement Stylus for MP-200

      Product form

      £249.00 Incl. VAT

          Description

          Nagaoka JNP-200 Replacement Stylus is the original replacement stylus for the MP-200 MM cartridge featuring an elliptical block diamond tip and boron cantilever.

          Replace a worn out or defective stylus to prevent damage to your records, and enjoy the best from your records again with more musical information being extracted from the vinyl grooves, allowing you to enjoy the best sound quality.

          The time for the stylus replacement varies depending on how often and how it is used.  For general use at home the expected time is between 150-200 hours which by then the stylus will begin to wear and the tone quality starts to deteriorate. It is recommend to replace the stylus as early as possible so you can enjoy clear music  and cause no damage to the disc grooves.

          Features

          • Superfine polished special elliptical diamond stylus
          • Powerful samarium cobalt magnet
          • Hardened low-mass, tapered aluminum alloy cantilever for very high fidelity
          • Carbon fiber reinforced plastic shoe
          • Anti ferrous magnetic perm-alloy shield casing

          Specifications

          Type:  Moving Permalloy
          Cantilever:  High-strength Boron
          Stylus Type:  Superfine elliptical diamond 0.4 x 0.7 mil
          Weight:  6.5g
          Output voltage: 1kHz, 5cm/sec: 4mV
          Frequency response: 20Hz - 23kHz
          Channel balance:  1kHz: >1.5dB
          Channel separation:  1kHz: >25dB
          Recommended loading:  47k ohms
          Dynamic compliance:  7.2 x 10-6 cm/dyne
          Static compliance:  20 x 10-6 cm/dyne
          Tracking force range:  1.5g - 2.0g

          Read more

          The Joe Audio Promise

          As a specialist supplier of some of the greatest equipment to our customers, we set ourselves high standards that match our amazing products and always strive to offer..

          • The latest and greatest equipment available at all times
          • FREE shipping anywhere within the UK
          • Specialist advice available from our customer service team

          Recently viewed products

          Login

          Forgot your password?

          Don't have an account yet?
          Create account