BRRRR IT'S COLD - Treat yourself with some HOT products

Grado Prestige Green 3 Moving Magnet Cartridge

    Description

    The Green3 uses a three piece OTL cantilever that has a Grado specific diamond mounted on a brass bushing.

    What's the difference between Black3 and Green3?
    Approximately 15% of the Black3 production run meet higher specifications. These are hand selected from the batch and designated as Green3.


    Grado’s OTL, or optimised transmission line, technology provides an ideal transfer of signal from the surface of the LP to the generator of the system. This technology rejects unwanted resonances and lowers distortion preserving the fundamental and harmonic frequencies of the music. This also helps keep noise generated by the motor system in the cartridge to a minimum.

    Grado’s OTL stylus/cantilever design makes records sound quieter, improves the height, width, and depth of the soundstage, and present more detail than previously obtainable.

    The Green3 is hand assembled by Grado's team in Brooklyn, with some builders having over 25 years of experience. This updated series of cartridges offers excellent tonal balance, dynamics, and realism, for a most rewarding reproduction of vocals and instruments. The coil winding techniques using ultra high purity copper wire, which were honed during the development of the Lineage Series, have let the electrical circuits achieve unison between the four coils in each phono cartridge. This allows for a precise balance between channels and accurate stereo imaging.
      
    As in all Grado phono cartridges the Green3 is powered by a twin magnet system that optimizes the balance between stereo channels. All internal magnetic circuit parts are held to extremely high tolerances creating the desired stereo imaging. Grado’s patented Flux-Bridger design allows the Green3 to have one of the lowest effective moving mass generating systems while creating an excellent balance throughout the full frequency range.

    Features 

    Image

    Hand-Built in Brooklyn

    Image
    Diamond Tipped
    Image
    Twin Magnet System
    Image
    Patented Flux-Bridge™
    Image

    Ultra High Purity Copper Coil

    Image

    Four Coil Unison

    Image

    De-Stressed Chasis

    Image

    Swiss Screw Machined

    Specifications

    Frequency Response: 
    10-50
    Principal: MI
    Channel Separation at 1KHz:  30
    Input Load:  47K
    Output at 1KHz 5CM/sec.:  5mV
    Recommended Tracking Force:  1.5
    Stylus Type:  E
    Inductance:  45mH
    Resistance: 475
    Compliance CUs:  20
    User replaceable stylus
    Mounting:  S/P
    Weight:  5.5

    Grado Prestige Green 3 Moving Magnet Cartridge

      Product form

      £129.00 Incl. VAT

          Description

          The Green3 uses a three piece OTL cantilever that has a Grado specific diamond mounted on a brass bushing.

          What's the difference between Black3 and Green3?
          Approximately 15% of the Black3 production run meet higher specifications. These are hand selected from the batch and designated as Green3.


          Grado’s OTL, or optimised transmission line, technology provides an ideal transfer of signal from the surface of the LP to the generator of the system. This technology rejects unwanted resonances and lowers distortion preserving the fundamental and harmonic frequencies of the music. This also helps keep noise generated by the motor system in the cartridge to a minimum.

          Grado’s OTL stylus/cantilever design makes records sound quieter, improves the height, width, and depth of the soundstage, and present more detail than previously obtainable.

          The Green3 is hand assembled by Grado's team in Brooklyn, with some builders having over 25 years of experience. This updated series of cartridges offers excellent tonal balance, dynamics, and realism, for a most rewarding reproduction of vocals and instruments. The coil winding techniques using ultra high purity copper wire, which were honed during the development of the Lineage Series, have let the electrical circuits achieve unison between the four coils in each phono cartridge. This allows for a precise balance between channels and accurate stereo imaging.
            
          As in all Grado phono cartridges the Green3 is powered by a twin magnet system that optimizes the balance between stereo channels. All internal magnetic circuit parts are held to extremely high tolerances creating the desired stereo imaging. Grado’s patented Flux-Bridger design allows the Green3 to have one of the lowest effective moving mass generating systems while creating an excellent balance throughout the full frequency range.

          Features 

          Image

          Hand-Built in Brooklyn

          Image
          Diamond Tipped
          Image
          Twin Magnet System
          Image
          Patented Flux-Bridge™
          Image

          Ultra High Purity Copper Coil

          Image

          Four Coil Unison

          Image

          De-Stressed Chasis

          Image

          Swiss Screw Machined

          Specifications

          Frequency Response: 
          10-50
          Principal: MI
          Channel Separation at 1KHz:  30
          Input Load:  47K
          Output at 1KHz 5CM/sec.:  5mV
          Recommended Tracking Force:  1.5
          Stylus Type:  E
          Inductance:  45mH
          Resistance: 475
          Compliance CUs:  20
          User replaceable stylus
          Mounting:  S/P
          Weight:  5.5

          The Joe Audio Promise

          As a specialist supplier of some of the greatest equipment to our customers, we set ourselves high standards that match our amazing products and always strive to offer..

          • The latest and greatest equipment available at all times
          • FREE shipping anywhere within the UK
          • Specialist advice available from our customer service team

          Recently viewed products

          Login

          Forgot your password?

          Don't have an account yet?
          Create account